MIL-DTL-16356E
ASTM B633
-
Standard Specification for Electrodeposited Coatings of Zinc on Iron and
Steel
ASTM D351
-
Standard Classification for Natural Muscovite Block Mica and Thins Based
on Visual Quality
ASTM F104
-
Standard Classification System for Nonmetallic Gasket Materials
ASTM F218
-
Standard Test Method for Measuring Optical Retardation and Analyzing
Stress in Glass
(Copies of these documents are available from ASTM International, 100 Barr Harbor Dr., P.O. Box C700, West
Conshohocken, PA 19428-2959 or online at www.astm.org.)
DIN GERMAN INSTITUTE FOR STANDARDIZATION STANDARDS
DIN 7081
-
Pressure Resistant Oblong Toughened Borosilicate Glass Panes for Sight Glasses for
Unrestricted Use at Low Temperature
(Copies of this document are available from DIN German Institute for Standardization, Deutsches Institut für
Normung e.V, Am DIN-Platz, Burggrafenstaße 6, 10787 Berlin, Germany or online at www.beuth.de. Foreign sales
contact Beuth Verlag.)
SAE INTERNATIONAL
SAE-AMS-2371
-
Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant
Steels and Alloys, Wrought Products and Forging Stock
SAE-AMS-2750
-
Pyrometry
SAE-AMS-5520
-
Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate 15Cr -
7.1Ni - 2.5Mo - 1.1Al, Solution Heat Treated, Precipitation Hardenable
SAE-AMS-QQ-S-763
-
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings
(Copies of these documents are available from SAE World Headquarters, 400 Commonwealth Drive, Warrendale,
PA 15096-0001 or online at www.sae.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance
with 4.2.
3.2 Material. Material used in the construction shall be the lightest practicable consistent with the strength
required for safety and reliability and shall meet all the requirements of this specification.
3.2.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally
preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the
operational and maintenance requirements, and promotes economically advantageous life cycle costs.
3.3 General construction. The gauge and as-assembled fittings, valves, and water connection piping shall be in
accordance with the requirements of this specification, and, where applicable, to the ASME Boiler and Pressure
Vessel Code requirements for power boiler water level indicators and gauge glass connections and ASME B16.34
for type A valves. The gauge assembly shall indicate variations in liquid level over the full range as specified
(see 3.9.3, 3.12.2, and 3.13.1). The gauge shall withstand frequent blowdown and rapid cut-in and shall provide
ample strength for the pressure at which the gauge is to operate.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business