MIL-DTL-16356E
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-22
-
Welded Joint Design
Mechanical Vibrations of Shipboards Equipment (Type I Environmental and
MIL-STD-167-1
-
Type II Internally Excited)
MIL-STD-767
-
Control of Hardware Cleanliness
(Classified)
MIL-STD-792
-
Identification Marking Requirements for Special Purpose Components
MIL-STD-2035
-
Nondestructive Testing Acceptance Criteria
(Copies of these documents are available online at https://quicksearch.dla.mil/ or https://assist.dla.mil.)
(Copies of MIL-DTL-24777 and MIL-STD-767 may be requested from commandstandards@navy.mil addressed
with a need-to-know.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
DEFENSE LOGISTICS AGENCY (DLA) DRAWINGS
02131
-
Bolt Assy, Gage
(Copies of this document are available from DLA Fleet Support, Engineering & Technical Services Drawings, 700
Robbins Ave. Philadelphia, PA 19111-5092.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) DRAWINGS
803-2177525
-
Valve Assemblies 1/4-2 BW, SW900LB
803-5184193
-
Valves 1/4 to 2 IN N.P.S., ANSI
5000-S5100-841604
-
Gage, Boiler Water, 18 Inch Minimum, Dimensional Standard for 600 psi
Nominal Pressure and 1200 psi Nominal Pressure
(Copies of these documents are available from the applicable repositories listed in S0005-AE-PRO-010/EDM.
Copies of S0005-AE-PRO-010/EDM are available online at https://nll.ahf.nmci.navy.mil.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
0989-064-3000
-
Cleanliness Requirements for Nuclear Propulsion Plant Maintenance by
Forces Afloat
T9074-AS-GIB-010/271
-
Requirements for Nondestructive Testing Methods
S9074-AR-GIB-010/278
-
Requirements For Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels
(Copies of these documents are available online at https://nll.ahf.nmci.navy.mil. This publication can be located by
searching the Navy Publications Index for the TMIN without the suffix.)
NAVSUP DRAWINGS
6685-798-5485
-
Shield Assembly
(Copies of this document are available from Navy Inventory Control Point Mechanicsburg 5450 Carlisle Pike
Mechanicsburg, PA 17050.)
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business