MIL-DTL-16356E
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
FF-S-85
-
Screw, Cap, Slotted and Hexagon Head
FF-S-86
-
Screw, Cap, Socket-Head
FF-S-92
-
Screw, Machine: Slotted, Cross-Recessed or Hexagon Head
FF-S-200
-
Setscrews: Hexagon Socket and Spline Socket, Headless
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-901
-
Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment and System
MIL-DTL-1222
-
Studs, Bolts, Hex Cap Screws, and Nuts
MIL-PRF-6855
-
Rubber, Synthetic, Sheets, Strips, Molded or Extruded shapes, General
Specification for
MIL-DTL-16232
-
Phosphate Coating, Heavy Manganese or Zinc Base
MIL-R-17131
-
Rods and Powders, Welding, Surfacing
Gasket and Packing Material, Rubber, for Use with Polar Fluids, Steam, and Air
MIL-DTL-22050
-
at Moderately High Temperatures
MIL-S-24093
-
Steel Forgings, Carbon and Alloy Heat Treated
MIL-P-24503
-
Packing Material, Graphitic, Corrugated Ribbon or Textured Tape and
Preformed Ring
MIL-P-24583
-
Packing Material, Graphitic or Carbon Braided Yarn
MIL-DTL-25988
-
Rubber, Fluorosilicone Elastomer, Oil- and Fuel Resistant, O-Rings
MIL-DTL-24696
-
Gasket, Sheet, Non-Asbestos
Gaskets, Metallic-flexible Graphite, Spiral Wound
MIL-G-24716
-
MIL-DTL-24777
-
Non-Metallic Materials with Special Requirements
(Classified)
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business