MIL-DTL-10215M
TABLE III. Classification of inspections.
Title
Requirement
Inspection
Qualification
Conformance
Examination of the product
Performance
Operational Testing
Resistance to wear
4.5.4.4 1
Operating torque
Flexibility
Torsional and tensile strengths
Environmental
Lubrication leakage
Vibration resistance
Shock resistance
Waterproofness
Corrosion resistance
Fungus resistance
Ozone resistance
1
only the testing in 4.5.4.4 (for Flexible Shaft Assemblies) is required
2
applies to Non-Metallic Shaft Assemblies only
3
applies to Flexible Shaft Assemblies only
4
applies to Flexible Shaft Assemblies and Adapters only
4.3.1 Qualification inspections. Qualification inspection sample size and testing sequence
shall be in accordance with table IV. Two samples will be tested through each sequence (i.e.,
sequence A has samples A-1 and A-2, each of which will be subjected to the required Examination
of Product inspection, followed by two additional tests, the Resistance to Wear and the
Waterproofness test. The required Performance inspections for each sample, complete sequence
A). Note: if required, the Qualifying Activity may modify the inspections required, the sample
size or the sequence of testing.
4.3.2 Maintenance of qualification. At specified intervals determined by the qualifying
activity, the manufacturer must be able to demonstrate the company still has the capabilities and
facilities necessary to produce the QPL items in accordance with this specification and in
accordance with the provisions governing qualification in SD-6.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business