MIL-DTL-10215M
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a part of
this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
L-P-380
- Plastic Molding Material Methacrylate
FEDERAL STANDARDS
FED-STD-595
- Colors Used in Government Procurement (Color chip 37875)
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-W-80
- Window, Observation, Acrylic Base, Antielectrostatic,
Transparent (for Indicating Instrument)
DOD-P-15328 - Primer (Wash), Pretreatment (Formula No. 117 for Metals) (Metric)
MIL-PRF-22750 - Coating, Epoxy, High-Solids
MIL-PRF-23827 - Grease, Aircraft and Instrument, Gear and Actuator Screw
MIL-DTL-53039 - Coating, Aliphatic Polyurethane, Single Component,
Chemical Agent Resistant
MIL-DTL-64159 - Coating, Water Dispersible Aliphatic Polyurethane, Chemical
Agent Resistant
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
- Identification Marking of U.S. Military Property
MIL-STD-202
- Test Method Standard - Electronic and Electrical Component Parts
MIL-STD-810
- Test Method Standard - Environmental Engineering
Considerations and Laboratory Tests
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other government documents and drawings. The following other government drawing,
form a part of this document to the extent specified herein. Unless otherwise specified, the issues are
those cited in the solicitation or contract.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business