INCH-POUND
MIL-DTL-10215M
21 June 2010
SUPERSEDING
MIL-DTL-10215L
15 August 2008
DETAIL SPECIFICATION
SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE
SHAFT ASSEMBLY CORES AND ADAPTERS
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers mechanical speedometers and tachometers, flexible
shaft assemblies, flexible shaft assembly cores and adapters.
1.2 Classification. The speedometers, tachometers, shaft assemblies, cores and adapters
are of the groups and classes as specified below (see 6.2).
1.2.1 Groups. The groups of speedometers, tachometers, flexible shaft assemblies, cores
and adapters are as follows:
Group A - Speedometer, 0-60 miles per hour (mph), fixed mounting
Group B - Tachometer, fixed mounting
Group F - Flexible shaft assemblies, flexible shaft assembly cores, and adapters
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616, or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil/.
AMSC N/A
FSC 6680
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business